How To Use
Ramp to garage.
Under 30 minutes.
Four steps. One routine. Works the same on a tinnie, a 30-footer, or a personal watercraft.
The full post-sesh routine.
Salt starts attacking your ride the minute you pull it off the water. The fix is simple: flush the engine, wash it off, protect the hardware, finish with a ceramic polish. Every time. No exceptions. Here's how we do it:
How to video:
Step 1
FLUSH SALT OUT OF THE ENGINE.
What you need: Salty Hero Engine Flush, flush canister and fresh water supply.
- Connect flush adapter to hose, ready to connect to your engine.
- Pour 50-100ml of Engine Flush solution into flush applicator.
- Plug in gardern hose and flushing applicator to your vessel's flushing point. Run and flush engine for 5–10 minutes.
- Repeat flushing process with garden hose only, flushing any excess engine flush solution through.
Do this after every saltwater sesh.
Step 2
Clean and Protect
What you need: Salty Hero Salt Wash, bucket, foam gun and noodle mitt.
- Add 50ml of Salt Wash to your snow foam gun and fill the rest with water.
- Conect to your hose and evenly foam over your PWC or vessel.
- Allow foam to sit for 30 seconds to break down and dissolve salt build-up.
- Hose or pressure wash thoroughly with fresh water.
- Use a Salty Hero microfibre drying towel for a streak free finish.
- Use after each ride for the best protection.
Tip: do this before the engine flush while the hose is out.
Step 3
Protect. Lock out corrosion before it starts.
What you need: Salty Hero Anti-Corrosive Spray.
- Ensure the surface is clean and dry before application.
- Shake the bottle well.
- Apply an even coat over metal surfaces, electrical components, and exposed fittings.
- Allow to dry. Reapply regularly for ongoing protection, especially after use in saltwater.
Safe on electrical. Displaces moisture on contact. Use it anywhere salt gets in and rust starts.
Step 4
Finish. Ceramic shine. Mint ride.
What you need: Salty Hero Spray & Polish, microfibre cloth.
- Ensure your PWC or vessel is freshly washed and dry.
- Lightly mist Spray and Polish onto external surfaces.
- Use a clean Salty Hero microfibre cloth to spread evenly.
- Flip cloth and buff to a high-gloss shine.
- Reapply regularly to maintain shine and UV protection.
Ceramic-infused. Hydrophobic. UV-protective. Reapply regularly.
Watch our how to video
The shortcut
Get the whole routine in one bucket.
The Salty Hero Boat & PWC Wash & Flush Kit — all four products plus foam gun, flush canister, drying towel and noodle mitt. Everything you need, bundled with everything you need to run the full routine.
Straight answers
The questions we get most.
How often should I flush the engine? Every saltwater sesh. No exceptions. It's the single highest-value habit in this list.
Can I use Salt Wash on decals and vinyl? Yes. It's pH-neutral and specifically formulated not to strip wax, fade vinyl, or attack decals.
Does the Anti-Corrosive Spray hurt electrical? No — it displaces moisture and is safe on wiring, terminals and connectors. That's what it's built for.
How long does the Spray & Polish last? Weeks per application, through multiple washes. Reapply every few sessions.
Is any of it toxic? Biodegradable where possible. Low-toxicity formulation. Marine-safe — formulated for the waterways you ride on.
Where is it made? Formulated, manufactured and shipped from Australia. Carries the Australian Made trademark.
Ready to run the routine?
Australian-made. Backed by us. Ships from the Gold Coast within one business day.